Getting heavy machinery onto site is only part of the access planning. What happens once it gets there can place very different demands on the surface, so ground protection mats need to be considered beyond the route in.
Heavy plant might be able to cross firm grassland or an unmade yard without causing an immediate problem. The damage can build once the same machine is turning, reversing and working over the same patch day after day, particularly if the ground gets wetter as the job goes on.
That’s where ground protection mats start doing more than providing access. They spread the load where the machine is actually working and help limit damage to the ground underneath. Less damage now generally means less remediation or reinstatement once the job’s finished.
The demands on the ground can vary across the site as well as over the course of the job. Different areas can need genuinely different matting, not just more or less of it.
We saw that clearly on a coastal defence project on a Site of Special Scientific Interest, where machinery weighing up to 125 tonnes, including the long-reach excavators placing the rock itself, needed to move across fragile beach terrain for a sea defence.
Most of that access ran on 200mm Ekki mats, thick enough for sustained heavy plant movement, but a lighter 100mm specification covered sections that didn’t need the same depth. Even on one site, under one contract, different areas can call for different specifications of heavy duty ground protection mats rather than one standard product throughout.
The same pattern holds at smaller scale on a far more ordinary job: the stretch leading in and the ground it leads into rarely need the same mat. Assuming they do either wastes coverage on the easy stretch or leaves the hardest-working patch short.
Route dimensions give us the starting point for quantities, but they’re only part of what we need to price the matting properly.
Plans or marked-up drawings show us where access ends and working areas begin, and where the matting requirement may change.
Plant details and intended use help determine the mat type and specification needed, particularly where machinery will be working repeatedly in one area.
Ground conditions help identify where a heavier specification may be needed rather than applying the same matting across the whole site.
If several areas need matting at the same time, that needs to be allowed for in the quantity and the quote.
Get in touch and talk us through what’s needed, the working area as much as getting there, and request a quote. We’ll price mat type, thickness and coverage around what the plant and ground actually require, rather than treating it as a simple number of square metres. More projects like this one are on our case studies page, and you can read more about the team on our about us
page.
Request a quote at bogmats.com/quote